0Cr25Al5 wire mesh,herring bone weave, for aerospace, water fuel
OhmAlloy142B
(Common Name:0Cr25Al5,Aluchrom-O)
OhmAlloy142B is a iron-chromium-aluminium alloy (FeCrAl alloy) characterized by high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.It is suitable for use at temperatures up to 1250°C.
Typical applications for OhmAlloy142B are used in electric ceramic cooktop,industrial furnace,heaters.
Normal composition%
C |
P |
S |
Mn |
Si |
Cr |
Ni |
Al |
Fe |
Other |
Max |
0.06 |
0.025 |
0.025 |
0.70 |
Max 0.60 |
23.0~26.0 |
Max 0.60 |
4.5~6.5 |
Bal. |
- |
Typical Mechanical properties(1.0mm)
Yield strength |
Tensile Strength |
Elongation |
Mpa |
Mpa |
% |
500 |
700 |
23 |
Typical Physical properties
Density (g/cm3) |
7.10 |
Electrical resistivity at 20ºC(mm2/m) |
1.42 |
Conductivity coefficient at 20ºC (WmK) |
13 |
Coefficient of thermal expansion |
Temperature |
Coefficient of Thermal Expansion x10-6/ºC |
20 ºC- 1000ºC |
15 |
Specific Heat Capacity
1, Temperature 20ºC
2, J/gK 0.46
3, Melting point (ºC) 1500
4, Max continuous operating temperature in air (ºC) 1250
5, Magnetic properties non-magnetic
Melting point (ºC) |
1500 |
Max continuous operating temperature in air (ºC) |
1250 |
Magnetic properties |
non-magnetic |
1J79 soft magnetic wire mesh,OEM types of weave,for shielding
Normal composition
Ni |
78.5~80.0 |
Fe |
Bal. |
Mn |
0.6~1.1 |
Si |
0.3~0.5 |
Mo |
3.8~4.1 |
Cu |
≤0.2 |
|
|
|
|
C |
≤0.03 |
P |
≤0.02 |
S |
≤0.02 |
|
|
Typical Mechanical properties
Yield strength |
Tensile Strength |
Elongation |
Mpa |
Mpa |
% |
980 |
1030 |
3~50 |
Typical Physical propertie
Density (g/cm3) |
8.6 |
Electrical resistivity at 20ºC(mm2/m) |
0.55 |
Coefficient of linear expansion(20ºC~200ºC)X10-6/ºC |
10.3~11.5 |
Saturation magnetostriction coefficient λθ/ 10-6 |
2.0 |
Curie point Tc/ ºC |
450 |
The magnetic properties of alloys with high permeability in weak fields |
1J79 |
Initial permeability |
Maximum permeability |
Coercivity |
Saturation magnetic induction intensity |
Сold-rolled strip/ sheet.
Thickness, mm |
μ0.08/ (mH/m) |
μm/ (mH/m) |
Hc/ (A/m) |
BS/ T |
≥ |
≤ |
0.01 mm |
17.5 |
87.5 |
5.6 |
0.75 |
0.1~0.19 mm |
25.0 |
162.5 |
2.4 |
0.2~0.34 mm |
28.0 |
225.0 |
1.6 |
0.35~1.0 mm |
30.0 |
250.0 |
1.6 |
1.1~2.5 mm |
27.5 |
225.0 |
1.6 |
2.6~3.0 mm |
26.3 |
187.5 |
2.0 |
cold drawn wire |
|
0.1 mm |
6.3 |
50 |
6.4 |
Bar |
|
8-100 mm |
25 |
100 |
3.2 |