Ohmalloy 4j29 0.2*30 mm Precision Alloys Invar Alloy Strip

Product Details
Customization: Available
Product Type: Strip
Material: Fe Ni Alloy
Gold Member Since 2012

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (6)
Find Similar Products

Basic Info.

Model NO.
4j29
PCD
No
ET
No
Hole
No
Temperature Factor of Resistivity
3.7~3.9
Density
8.2 g/cm3
Transport Package
Spool, Coil, Wooden Case
Specification
0.05mm ~ 5.0mm*6.0mm ~ 250mm
Trademark
ohmalloy
Origin
Shanghai, China

Product Description

0.2×30 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width

 

Sealing glass elements of Vacuum switch tube

 

OhmAlloy-4J29 (Expansion alloy)
(Common Name: Kovar, Nilo K, KV-1, Dilver Po, Vacon 12)

 

Kovar is a nickel-cobalt ferrous alloy compositionally identical to Fernico, designed to be compatible with the thermal expansion characteristics of borosilicate glass (~5 × 10−6 /K between 30 and 200 °C, to ~10 × 10−6 /K at 800 °C) in order to allow direct mechanical connections over a range of temperatures. It finds application in electroplated conductors entering glass envelopes of electronic parts such as vacuum tubes (valves), X-ray and microwave tubes and some lightbulbs.

The name Kovar is often used as a general term for Fe-Ni alloys with these particular thermal expansion properties. Note the related particular Fe-Ni alloy Invar which exhibits minimum thermal expansion.

 

OhmAlloy-4J29 also known as Kovar alloy. it was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.

 

 

OhmAlloy-4J29was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.

 

 

Mainly used in electric vacuum components and emission control, shock tube, igniting tube, glass magnetron, transistors, seal plug, relay, integrated circuits lead, chassis, brackets and other housing sealing.

 

Style of supply

 

Alloys Name Type Dimension  
OhmAlloy-4J29 Wire D= 0.1~8mm  
OhmAlloy-4J29 Strip W= 5~250mm T= 0.1mm
OhmAlloy-4J29 Foil W= 10~100mm T= 0.01~0.1mm
OhmAlloy-4J29 Bar Dia= 8~100mm L= 50~1000mm

Normal composition%

Ni 28.5~29.5 Fe Bal. Co 16.8~17.8 Si ≤0.3
Mo ≤0.2 Cu ≤0.2 Cr ≤0.2 Mn ≤0.5
C ≤0.03 P ≤0.02 S ≤0.02    

 

 

Tensile Strength, MPa

Code of condition Condition Wire Strip
R Soft ≤585 ≤570
1/4I 1/4 Hard 585~725 520~630
1/2I 1/2 Hard 655~795 590~700
3/4I 3/4 Hard 725~860 600~770
I Hard ≥850 ≥700

 

Typical Physical properties

Density (g/cm3) 8.2
Electrical resistivity at 20ºC(OMmm2/m) 0.48
Temperature factor of resistivity(20ºC~100ºC)X10-5/ºC 3.7~3.9
Curie point Tc/ ºC 430
Elastic Modulus, E/ Gpa 138

 

 

The heat treatment process

Annealing for stress relief Heated to 470~540ºC and hold 1~2 h. Cold down
annealing In vacuum heated to 750~900ºC
Holding time 14 min~1h.
Cooling rate No more than 10 ºC/min cooled to 200 ºC

 

 

Coefficient of expansion

θ/ºC α1/10-6ºC-1 θ/ºC α1/10-6ºC-1
20~60 7.8 20~500 6.2
20~100 6.4 20~550 7.1
20~200 5.9 20~600 7.8
20~300 5.3 20~700 9.2
20~400 5.1 20~800 10.2
20~450 5.3 20~900 11.4

 

Thermal conductivity

θ/ºC 100 200 300 400 500
λ/ W/(m*ºC) 20.6 21.5 22.7 23.7 25.4

 

 

FAQ
 

1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you want.
If we do not have, for spool wire, we can produce 1 spool, about 2-3kg. For coil wire, 25kg.


2. How can you pay for small sample amount?
We have Western union account, wire transfer for sample amount also ok.

3. Customer do not have express account. How will us arrange the delivery for sample order?
Just need to provide your address information, we will check the express cost, you can arrange the express cost together with sample value.

4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery and total amount. Let's talk more in details after getting your detailed requirements.

5. Do you provide free samples?
If you want several meters and we have stock of your size, we can provide, customer need to bear the International express cost.

6. What's our working time?
We will give you reply through email/phone Online contact tool within 24 hours. No matter working day or holidays.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier