0.32mm AWG28 Swg30 Fast Heating Speed Nikrothal 80 Wire for Electric Cigarette Atomizer Ni80cr20

• Product Type: Wire
• Material: Nicr
• Carbon Content: -
• PCD: -
• ET: -
• Hole: -
• Model NO.: Ohmalloy109
• Resistivity at 20c: 1.09
• Density (g/cm3): 8.4
• Operating Temperature: 1200 C
• Transport Package: Plastic Packing Inside, Wooden Box Outside, Choos
• Specification: D=0.03mm~8mm
• Trademark: Ohmalloy
• Origin: Shanghai
• HS Code: 7505220000
• Production Capacity: 80000 Kilograms Per Week

Product Description

AWG28 SWG40 0.32mm Fast Heating Speed nikrothal 80 wire for Electric Cigarette Atomizer Ni80Cr20
OhmAlloy109
(Common Name: Ni80Cr20,Nikrothal 8,MWS-650,NiCrA,Tophet A,HAI-NiCr 80,Chromel A,Alloy A,Alloy 650,N8,Resistohm 80, Stablohm 650,Nichorme V,Nikrothal 80.)

Nichrome has a silvery gray coloration. Nichrome wires are quite oxidation resistant. When at a high temperature environment, up to 1200 C (Nicr 8020), both nickle oxide and chromium oxide will be formed. As chromium oxide is more stable than nickel oxide, a layer of chromium oxide will be formed on the surface of the nichrome wire. The diffusion rate D of oxygen through chromium oxide is very low, which is 10-14 cm2/sec.

In order to have enough resistance, mental conduct wires always are designed into thin form. They process of oxidation will be quick, making them brittle and break when heated in air. By contrast, not only does nichrome have a excellent oxidation resistant, it also has a good ductility after high temperature use. Besides that, nichrome alloys have a higher emissivity compared to other air-stable resistance alloys. Nichrome alloys will endure a lower element temperature at the same surface load. Moreover, Nichrome alloys will be preferred in low-temperature applications because of its non-magnetic feature. It also has a higher hot and creep strength,  wet corrosion resistance and good wear resistance.

OhmAlloy109 is a nickel-chromium alloy (NiCr alloy) characterized by high resistivity, good oxidation resistance and very good form stability. It is suitable for use at temperatures up to 1200°C,and hold a superior service life compared to Iron chromium alumium alloys.
Typical applications for OhmAlloy109 are electric heating elements in home appliances,industrial furnaces and resistors(wirewound resistors,metal film resistors), flat irons, ironing machines, water heaters, plastic moulding dies, soldering irons, metal sheathed tubular elements and cartridge elements.

Normal composition%

C	P	S	Mn	Si	Cr	Ni	Al	Fe	Other
Max
0.03	0.02	0.015	0.60	0.75~1.60	20.0~23.0	Bal.	Max 0.50	Max 1.0	-

 

Typical Mechanical properties(1.0mm)

Yield strength	Tensile Strength	Elongation
Mpa	Mpa	%
420	810	30

 

Typical Physical properties

Density (g/cm3)	8.4
Electrical resistivity at 20ºC(Ωmm2/m)	1.09
Conductivity coefficient at 20ºC (WmK)	15

 

Coefficient of thermal expansion
Temperature	Coefficient of Thermal Expansion x10-6/ºC
20 ºC- 1000ºC	18

 

Specific heat capacity
Temperature	20ºC
J/gK	0.46

 

Melting point (ºC)	1400
Max continuous operating temperature in air (ºC)	1200
Magnetic properties	non-magnetic

 

Temperature Factors Of Electrical Resistivity
20ºC	100ºC	200ºC	300ºC	400ºC	600ºC
1	1.006	1.012	1.018	1.025	1.018
700ºC	800ºC	900ºC	1000ºC	1100ºC	1300ºC
1.01	1.008	1.01	1.014	1.021	-

Style of supply

Alloys Name	Type	Dimension
OhmAlloy109W	Wire	D=0.03mm~8mm
OhmAlloy109R	Ribbon	W=0.4~40	T=0.03~2.9mm
OhmAlloy109S	Strip	W=8~250mm	T=0.1~3.0
OhmAlloy109F	Foil	W=6~120mm	T=0.003~0.1
OhmAlloy109B	Bar	Dia=8~100mm	L=50~1000