High Quality Expansion Alloy Kovar Tube for Sealing Vacuum Instrument

Product Type: Tube
Material: Feni Alloy
Carbon Content: No
PCD: No
ET: No
Hole: No
Samples:
US$ 0/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
OhmAlloy4J29
Certificate
SGS, ISO, RoHS
Sample
Free Sample
Resistivity(μΩ.M)
0.48
Density, g/cm3
8.2
Surface Treatment
Bright or Oxidation
Width
9~250 mm
Application
Sealing Material
Elastic Modulus, E/ Gpa
138
Temperature Factor of Resistivity
3.7~3.9
Curie Point Tc/ ºC
430
Transport Package
Waterproof Paper+ Wooden Case
Specification
Thickness: 0.1~10 mm
Trademark
Ohmalloy
Origin
Shanghai, China
HS Code
7507120000
Production Capacity
35000 Kgs Per Month

Product Description

 
OHMALLOY
OhmAlloy-4J29  (Expansion alloy)
(Common Name: Kovar, Nilo K, KV-1, Dilver Po, Vacon 12)OhmAlloy-4J29 also known as Kovar alloy. it was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.

OhmAlloy-4J29was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.
 
OhmAlloy-4J29 not only has thermal expansion similar to glass, but its nonlinear thermal expansion curve can often be made to match a glass, thus allowing the joint to tolerate a wide temperature range. Chemically, it bonds to glass via the intermediate oxide layer of nickel oxide and cobalt oxide; the proportion of iron oxide is low due to its reduction with cobalt. The bond strength is highly dependent on the oxide layer thickness and character. The presence of cobalt makes the oxide layer easier to melt and dissolve in the molten glass. A grey, grey-blue or grey-brown color indicates a good seal. A metallic color indicates lack of oxide, while black color indicates overly oxidized metal, in both cases leading to a weak joint.
 
Mainly used in electric vacuum components and emission control, shock tube, igniting tube, glass magnetron, transistors, seal plug, relay, integrated circuits lead, chassis, brackets and other housing sealing.
 
 
Normal composition%
Ni 28.5~29.5 Fe Bal. Co 16.8~17.8 Si ≤0.3
Mo ≤0.2 Cu ≤0.2 Cr ≤0.2 Mn ≤0.5
C ≤0.03 P ≤0.02 S ≤0.02    
 
Tensile Strength, MPa
Code of condition Condition Wire Strip
R Soft ≤585 ≤570
1/4I 1/4 Hard 585~725 520~630
1/2I 1/2 Hard 655~795 590~700
3/4I 3/4 Hard 725~860 600~770
I Hard ≥850 ≥700
 
Typical Physical properties
Density (g/cm3) 8.2
Electrical resistivity at 20ºC(Om*mm2/m) 0.48
Temperature factor of resistivity(20ºC~100ºC)X10-5/ºC 3.7~3.9
Curie point   Tc/ ºC 430
Elastic Modulus,  E/ Gpa 138


 
 
 
 
 
Coefficient of expansion
θ/ºC α1/10-6ºC-1 θ/ºC α1/10-6ºC-1
20~60 7.8 20~500 6.2
20~100 6.4 20~550 7.1
20~200 5.9 20~600 7.8
20~300 5.3 20~700 9.2
20~400 5.1 20~800 10.2
20~450 5.3 20~900 11.4


 
Thermal conductivity
θ/ºC 100 200 300 400 500
λ/ W/(m*ºC) 20.6 21.5 22.7 23.7 25.4
 
The heat treatment process
Annealing for stress relief Heated to 470~540ºC and hold 1~2 h. Cold down
annealing In vacuum heated to 750~900ºC
Holding time   14 min~1h.
Cooling rate No more than  10 ºC/min cooled to 200 ºC
 
Style of supply
Alloys Name Type Dimension  
OhmAlloy-4J29 Wire D= 0.1~8mm  
OhmAlloy-4J29 Strip W= 5~250mm T= 0.1mm
OhmAlloy-4J29 Foil W= 10~100mm T= 0.01~0.1
OhmAlloy-4J29 Bar Dia= 8~100mm L= 50~1000
 



FAQ

1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you want.
If we do not have, for spool wire, we can produce 1 spool, about 2-3kg. For coil wire, 25kg.
2. How can you pay for small sample amount?
We have Western union account, wire transfer for sample amount also ok.

3. Customer do not have express account. How will us arrange the delivery for sample order?
Just need to provide your address information, we will check the express cost, you can arrange the express cost together with sample value.

4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery and total amount. Let's talk more in details after getting your detailed requirements.

5. Do you provide free samples?
If you want several meters and we have stock of your size, we can provide, customer need to bear the International express cost.

6. What's our working time?
We will give you reply through email/phone Online contact tool within 24 hours. No matter working day or holidays.

Send your message to this supplier

*From:
*To:
avatar Mr. Qiu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now