Customization: | Available |
---|---|
Product Type: | Wire |
Material: | CuNi |
Still deciding? Get samples of US$ 50/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
NC003 CuNi1 Alloy3 Wire Copper Nickel Alloy for Heating Cable on Floor or Roof
Common Name: CuNi1, Alloy3,HAI3.NC3
OhmAlloy 3 is a copper-nickel alloy (Cu99Ni1 alloy) with low resistivity for use at temperatures up to 200°C.
OhmAlloy 3 is kind of low resistance (heating) alloy.It is one of the key materials of the low-voltage electrical products. It is widely used in low-voltage circuit breaker, electric blankets.thermal overload relay and other low-voltage electrical product.
Nickel | 1 | Manganese | - |
Copper | Bal. |
Typical Mechanical properties(1.0mm)
Yield strength | Tensile Strength | Elongation |
Mpa | Mpa | % |
90 | 210 | 25 |
Typical Physical properties
Density (g/cm3) | 8.9 |
Electrical resistivity at 20ºC (ohmmm2/m) | 0.03 |
Temperature factor of resistivity(20ºC~600ºC)X10-5/ºC | <100 |
Conductivity coefficient at 20ºC (WmK) | 145 |
EMF vs Cu(μV/ºC )(0~100ºC ) | -8 |
Coefficient of thermal expansion | |
Temperature | Thermal Expansion x10-6/K |
20 ºC- 400ºC | 17.5 |
Specific heat capacity | |
Temperature | 20ºC |
J/gK | 0.380 |
Melting point (ºC) | 1085 |
Max continuous operating temperature in air (ºC) | 200 |
Magnetic properties | non-magnetic |
Corrosion resistance performance
Alloys | Working In atmosphere at 20ºC | Working at max temperature 200ºC | |||||
Air and oxygen contain gases |
gases with Nitrogen |
gases with sulfur oxidability |
gases with sulfur reductibility |
carburization | |||
OhmAlloy3 | good | bad | bad | bad | bad | good | |
Style of supply
Alloys Name | Type | Dimension | ||
OhmAlloy12W | Wire | D=0.06mm~8mm | ||
OhmAlloy12R | Ribbon | W=0.4~40 | T=0.05~2.9mm | |
OhmAlloy12S | Strip | W=8~200mm | T=0.1~3.0 | |
OhmAlloy12F | Foil | W=6~120mm | T=0.005~0.1 | |
OhmAlloy12B | Bar | Dia=8~100mm | L=50~1000 |
CuNi1 Copper Nickel Alloy Wire Application